KI Results

Fully glazed door families in Revit will not usually contribute to glazing percentage since their VLT value will typically be

 If changes are made to the model geometry, Solar Loads will need to be recalculated in the Building Manager to

In the Facade Navigator, each Facade should have a list of Surfaces with the same orientation. For example, Facade 1

When creating a Curtain System, they should be created separately on each orientation and for each wall of the project.

If some Surfaces are not highlighting on the model, this may be due to model issues or missing properties for

When using Linked Elements/Files, they should be set as Room Bounding. These will then contribute to model enclosure (they may be

This is due to the Energy Analytical Model (EAM) being recreated in Revit. While this is happening, it will prevent

If you have already calculated with Shading Factors on and then calculate Solar Loads without Shading Factors, results may remain at the lower figures.  The

It will be necessary to close the application and re-launch if True North is modified during a session.  The Energy